home *** CD-ROM | disk | FTP | other *** search
- Path: news.vol.it!eugenio
- From: eugenio@freenet.hut.fi (Eugenio Gori)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Help with my Fastlane!
- Date: 18 Apr 96 05:46:44 CET
- Organization: greetings from Florence - Italy
- Message-ID: <31762ba4@freenet.hut.fi>
- NNTP-Posting-Host: tifi32.vol.it
- Mime-Version: 1.0
- Content-Type: text/plain; charset=iso-8859-1
- Content-Transfer-Encoding: 8bit
- X-GateSoftware: AmiGate 1.6 (13.11.95)
-
-
- I'm having some problems with my Fastlane Z3 scsi board.
-
- Before all my config :
-
- A4000/40,
- Buster rev. 9,
- z3scsi.device rev. 5.820,
- 1gb conner scsi2 hd.
-
- Sometimes a requester open up sayng that disk have errors on block
- xxxxxx. Mask and maxtransfer's are ok, like the manual suggest. I
- don't know what it is, please give me some idea. I also have the
- correct chip under the cpu-board...
-
- Another problem is that my floppy drive didn't save on floppy long
- files, it breaks the transfer after about 1/3 of it. Only when the
- Fastlane is inserted.
-
- H.E.L.P.
-
-
-
-
-
- [ please forward-me replies to this article in email ]
- [ as i don't follow usually this newsgroup. thanks ]
-
-
-
-
-
-
- _ _ _ _ o _
- <<== (/_(_|(_|(/_| )|(_) ===============================>>
- _| [tHE tRENDY dEALER/rAM-jAM]
-
- <-> eugenio@freenet.hut.fi
- <-> http://home.sol.no/borseman/trendy/eugenio
- <-> IRC nick : tRENDY (often in night-hours)
-
- <<======================================================>>
-
-
-